Lamp Clamp

So, as seen in the pictures, I added this cute little LED Lamp, what I found on a well known Internet shop (5W, ~30cm, LC-L-052-W or LC-L-052-WW), to the side of the gantry. Using just a double sided tape didn't work, due to heat an vibration it always fell off. A single clamp is enough 'cause the tape is still there to hold it in place. Additionally the cable is fixed on top to lead it out of the working area. Also added black tape to block the light to go out to the front too much.
Made it out of ABS to have it a bit more bending proof.
The gap between moving parts and the gantry post is 5mm, so I made the clamp 2.8mm.
It's designed for the Anycubic I3 Mega.
The random name is what TinkerCAD provided me.
Duration of printing task: 12min.

PS:
top bar and pole are slightly different in size, that's why i created a better fitting one for the top bar.

Update Oct.2019:
added the stl for the top bar clamp, its optimized for 0.4 nozzle and 0.3 height,
this time printed in PETG cause the ABS parts broke into pieces after being there for over a year. And i drew it in FreeCAD.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iIJ8ChDbf5d