(Failed失敗版)CR-10S E3D Titan V6 Volcano Direct Drive Extrude Set_v1 火山噴嘴近端擠出

IT's a E3D V6 Titan Direct Drive Extrude Mount (Right Sided), designed for replacing original X axis mount.
此E3D-泰坦直式擠出座是取代原廠的X軸鋁座，必須使用右側擠出的E3D泰坦擠出機。

Might need to accomplish whole set with another left side Fan Rack design in my library.
可能需要搭配我設計庫裡的左側風扇架使用，或自行修改
https://www.thingiverse.com/thing:2794948

Two included files are Mount Plate and Fixing Cup.
兩個檔案包括改裝座以及鎖固帽

Better use PLA+, T-PLA, PLA-Carbon, PLA-Glass Fibre, ABS or other High Strength/ High Temperature Durable Performance filaments.
最好使用強度較高與耐熱度較高的線材來製作，像是高強度PLA+, T-PLA, PLA-碳纖, PLA-玻纖, ABS...

Recommend setting:
建議設定

Print Speed列印速度: 50mm/s↓
Infill填充: must 100%
Material Flow擠出流量: 102105% for 0.40.6 噴頭nozzle.
Check <> and <> for better flatting.
勾選開啟<<底座>> 和<<支撐>>選項
consume消耗 66g

Note: you'll need to cut a short piece of PTFE tube for connecting E3D-Titan mount and the top of Heatsink, this distance is helpful for retraction.
另外還需要減一小段鐵氟龍管來接泰坦座底部和散熱管上端，作為擠出回抽的線材緩衝空間。