D-Bot 3D printer simple addon parts for original D-Bot build

Here is some additional parts I made for this D-Bot CoreXY build: https://www.thingiverse.com/thing:1001065

I needed very simple Ramps holder, external mosfer module holder, pad raisers for bottom of the frame, 12864 screen mount and small extension for extruder cables.

Everything connects to 2020 v slot used on D-Bot frame.

I add more parts here what I make for my D-Bot frame.

List of parts and their details:

bltouch_mount

This part connects to E3DV6 exturder mount. I connected BLTouch clone with M3 bolts using two small washers to have it perfect position. See images. This is for STOCK D-BOT extruder.

fuse_holder

I use fast fuse in the future as soon as I get my big power supply. This works as a safety fuse and fast switch to turn off printer. This connects to V Slot and fuse connects to parts own DIN "rail" This fuse is 18 millimeters from it's width.

bottom_pad

This part connects to bottom of the frame on every corner. I used soft pads connected on bottom when installed. Remove existing M5 bolt as is and connect this pad between the bolt + washer and frame.

21A Mosfet ramps holder

This is just 2020 v slot holding part for aliexpress external ramps 1.4 mosfet module. Install anywhere on the frame using M5 bolt, M5 washer and v slot T nut OR square v slot nut.

Arduino Ramps holder

2020 v slot holding part for Arduino + Ramps combination. Install anywhere on the frame using M5 bolt, M5 washer and v slot T nut OR square v slot nut.

12864 screen mount p1 and 2 x p2 parts

P2 named parts connects to V slot with M5 bolt, M5 washer and v slot T nut OR square v slot nut. Connect P1 part into 12864 reprap discount full graphics screen using M3 bolt (I used 10mm length) and M3 nuts. Then connect screen having this P1 part into between P2 parts using again M3 10mm bolts.

Taller cable holder extension

is stock D Bot extruder cable / feeding tube holder's longer version. Helped myself to avoid cables to bent too much on extruders side. I used D bot kit M3 bolts which were long enought to go thru..

Feeder mount

Filename: feeder_mount.stl
I added this part at 15.9.2019 which comes between stepper motor and feeder. I bought feeder from Aliexpress and it can be found with names like "Metal MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75m" I like this feeder because it's more reliable than original printed parts feeder. I have included image of my installation.