3d print your own bubble machine.
Some assembly required
YouTube videos.,
https://youtu.be/cSeT9kKxwes
https://youtu.be/UKYjzi8qUtA
https://youtu.be/aAXfj-jadm8
Required parts:
- 3D printed parts. Can be printed with
link This filament is very good for me.
- MG90S, SG90 or HK15178 servo modified for continuous rotation
SG90 Amazon Search has a single quantity price of 1.99 at the time of posting Amazon
link
- Computer fan Frame size 92 X 92 X 25 mm (3.6 x 3.6 x 1 in) >50CFM
Amazon
link
- 12v Power supply(Plug or battery)
- Small 5v regulator to supply the 5v to the servo (must adjust regulator prior to wiring to servo. This is what I used
link The voltage can also be lowered if the servo is spinning too fast.
- Switch
- Misc hardware
SC_Hawk
