September 7, 2018
Description
This is a case for one of the popular cheap DIY bench power supplies from ebay. This case is made for this particular model: https://ebay.to/2MXaFNq
I added a hole to mount a 12V DC fan to the case. The board on the PSU has a connector for the fan.
The top part of the case goes together with glue. The board is attached to the bottom of the case with M3 screws, hidden inside the feet of the case.
Printable without supports (as always) and without post print processing.
Update 2018-09-09
Added slots above the screw-connectors, input and output, for a screw driver to access to connectors even when the case is assembled.
License:
Creative Commons - Attribution
lbroman
