OctOLED is remote (WiFi on ESP8266) mini display (SSD1306 128x64 OLED) showing the status of OctoPrint. The motivation of the project was that the printer is behind me and I do not always have space on the screen to have an open card with the OctoPrint website to see the print progress. The solution works perfectly ingeniously, allowing easy access to the current progress bar and printer temperature status. I have designed a quite well-fitting casing for the whole which (as it seems to me) should not resemble a mare. To achieve this goal in the upper part I placed the display itself and in the stand ESP8266, leaving a cable tunnel between them. Let's get started ...

Polish description available at majsterkowo.pl

Required Parts

• 1x ESP8266 (I used NodeMCU v2)
• 1x SSD1306 (OLED 128x64 display)
• 4x Wire F-F 20cm (I used 40 from Nettigo)
• 1x MicroUSB charger for power project after finished

Module programming

The code for the ESP8266 module and description how to use it with connection scheme is available on project GitHub

Video in action

You can see this project in action on YouTube

Other download

• Source code at GitHub