Cornhole LED Trim Ring

Cornhole trim ring printed with clear PLA and lit with a 12 volt LED strip. The ring will screw into the bottom of the board with 8 #8 1/2in wood screws. The thickness of the board I used is 23/32. The size of the ring is 1/2 inch, so the hole that is cut in the board is a little greater than 7 inches.

battery holder is at https://www.thingiverse.com/thing:3135663

LED light strip with LED controller and power supply to test the product
Amazon Link https://www.amazon.com/SUPERNIGHT-Waterproof-300LEDs-Changing-Flexible/dp/B00ASHQQKI/ref=as_li_ss_tl?ie=UTF8&qid=1537157119&sr=8-3&keywords=rgb+5050+5M&th=1&linkCode=sl1&tag=schawk-20&linkId=89affba5f2e466b8966dc6c2b37173e7&language=en_US

YouTube link of product in action: https://youtu.be/03FJQrXPqvA

ring_ID = 6 x 25.4; //ring inside diameter
ring_W = 0.5 x 25.4; //ring width... so the hole in the board needs to be cut to 7 inches
ring_h = 18.25 + ring_mount_H; //wood size 18.25mm or 0.715in or 23/32in

Printed with https://www.amazon.com/SUPERNIGHT-Waterproof-300LEDs-Changing-Flexible/dp/B00ASHQQKI/ref=as_li_ss_tl?ie=UTF8&qid=1537157119&sr=8-3&keywords=rgb+5050+5M&th=1&linkCode=sl1&tag=schawk-20&linkId=89affba5f2e466b8966dc6c2b37173e7&language=en_US
This filament is very good for me. Full roll prints without extruder jams

Please comment for any requested changes or improvements.

Thank You