DDR4 80mm Fan Mount

This is a mount for dual 80mm fans, to cool up to four Corsair Vengeance LPX DDR4 memory modules. I was having problems maintaining stable operation with my RAM overclocked to 3200 MHz, and I had a couple of Arctic F8 fans lying around, so I figured I would mount the fans so as to cool the RAM sticks directly.

This mount clips to the RAM sticks (taking advantage of the Vengeance LPX's heat spreader geometry) with minimal touch points, and allows as much airflow as possible. NOTE: Don't try to print this in PLA, as it will soften and sag in your hot PC. Use ABS or some other material that can take higher temperatures. Also, due to shrinkage, I had to print this at 101.875% size...YMMV on that.