The Edge: Dawnfall - Dvergar Shrine - Junkyard

Okay, so this is the final version for now. I'm still having trouble exporting this model. The mesh get some weird artifacts when trying to make it solid for some reason which are beyond repairable. So this is "just" a combined model, which seems to look usable in a slicer. I wasn't able to test print it yet, but unless I'm missing something huge, the print should be okay. In case you run into any trouble please let me know, so I can look into it.

edit1: On printing I've ran into the issue that the chains holding the cauldron were not properly connected when printing with 0.4mm nozzle. So I uploaded a hotfixed version, which worked out well for me.

edit2: So I made an alternative version of this with some adjustments. Made the chains and the hot melted iron stream thicker so they are easier to print. I also removed all the junk in the back, because they needed a lot of supports, which also were pain to remove. Sadly the alternative version doesn't look like a junkyard any longer but more like a forge, which still is okay, but doesn't go well with it's name. So If you run into trouble printing the original version, you can try the alternative reworked version.

This one here is the Dvergar Shrine - Junkyard.

Other Shrines can be found as followed:
Reborn Shrine - Thornheart Wood: https://www.thingiverse.com/thing:3074485
Demon Shrine - Blood Altar: https://www.thingiverse.com/thing:3074451
(WIP) Rha-Zack Shrine - Energy Cloud: https://www.thingiverse.com/thing:3095888
Faceless Shrine - Hatchery: https://www.thingiverse.com/thing:3104535
Chapter Shrine - Frontline Chapter: https://www.thingiverse.com/thing:3127668
Darkness Shrine - Shadow Gate- https://www.thingiverse.com/thing:4376138

Please let me know how you like it.

Cheers
Sismanski