Cabinet or Drawer Pull, Handle

Simple, easy to print, parametric cabinet handle

Most likely the only thing that should need to be changed is "handle_L" which is the hole center spacing for the handle mount. For this case the distance for the mount hole centers are 6.25 inches apart. This is the distance between the hole centers for the Ikea cabinet that had missing handles in the picture above.

Printed with https://www.amazon.com/dp/B01CF3GNTG/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=schawk-20&linkId=dff751a84eb06ecf43c38729ffad2ea7&language=en_US
This filament is very good for me. Full roll prints without extruder jams

The 3D print was then finished with Plasti Dip matte black spraypaint
https://www.amazon.com/dp/B01CF3GNTG/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=schawk-20&linkId=dff751a84eb06ecf43c38729ffad2ea7&language=en_US

Parameters
handle_D = 0.5 x 25.4; //handle diameter
handle_L = 6.25 x 25.4; //handle mount hole spacing
handle_flat = 10; //handle raised height off the bed (0 will be the center of the spheres)
ring_mount_ID = 4.1; //screw Size ID
ring_mount_OD = 1/2 x 25.4;

Please comment on changes, recommendations, or size changes