Tank Cradle/Holder

Cradle to keep a CO2 tank from rolling around in the back of the car on the way to the fill/exchange shop. Also good for spare tank storage.

STLs provided for 5 & 10 lb. tanks. - I've used the one for my 5 lb. tank, but don't actually own a 10, so please comment if you print one and it works. A 15 lb. tank is apparently the same diameter as a 10 lb. tank, so it should work there too but maybe use 2 of them.

Also, don't forget hot car interiors can soften PLA so stick to ABS or PET if you're going to leave it in the car. Also, leaving a pressurized tank in a hot car is also not a "genius move" either.