Spur Gear Generator with Fusion 360 (使用Fusion 360的正齒輪產生器)

    A simple spur gear generator with Fusion 360 "Parameters" function. It's my first time using parameters in Fusion 360 and I learned all these things from a video by "Chaos Core Tech". It's a great tutorial about parameters and worth your time if you are interested.

    Back to the gear, there is a bug in the generator. This bug occurs when base circle is smaller than root circle, mostly when number of teeth or pressure angle is relatively big. When it occur, the fillet at the root corner won't be as you expect. Still working on this problem and will update the generator once I find a better approach.

　　這是用Fusion 360做的一個正齒輪產生器，利用了Fusion 360的「Parameter」功能。這是我第一次使用這個功能，主要是透過「Chaos Core Tech」的這個教學影片學習操作的方式。這段教學簡單明瞭，如果你有興趣，很值得一看。

　　不過，產生器目前還有個問題。當基圓比齒底圓還小的時候，齒底的圓角看起來會和你預期的有落差。一般會發生在齒數比較多，或是壓力角比較大時。我還在想辦法解決這個問題，如果有進展會再更新產生器的檔案。