Baseball Bat Display

Baseball Bat Display

Boxcut2 and Boxcut3, as well as BoxcutStrip2 and BoxCutstrip3 are the exact same size, same holes and everything, just put both in as the original design was spliced into 4 pieces.

Two versions of Boxcut4 (right end). Boxcut4 is a smaller holder made for the handle side of the bat, but since Bats can be signed in different directions, I made a Boxcut4wide to be the same size as Boxcut1, tat way the bat can be flipped either way and settle in you'd like.

You will need to sheets of glass or acrylic at 1/8" thick, that I got from Ace hardware for .02 a square inch (glass) and .03 cents a square inch (acrylic). Obviously you can choose whatever you'd like to fit your needs and wants.

Hole dimensions are:
Top Hole (972 mm x 103 mm x 5 mm)
Side Hole (972 mm x 72 mm x 5 mm)

Top Glass Cut (38 3/16" x 3 15/16") or (970mm x 101mm)
Side Glass Cut (38 3/16" x 2 3/4") or (970mm x 70mm)

I know that isn't perfect measuring changes, but while designed in mm (mm dimensions will give you 2 mm of wiggle room), the places I use to cut are in inches so I tried to balance it out. I had to have Ace re-cut the side piece. Feel free to use whatever dimensions you feel will slide in correctly.

May update later with a name plate or with wood filament, but for now just throwing the design out there as there's no display cases for Bats!

Please post your makes, would love to see what how people finish them/what bats warrant the display!