October 13, 2018
Description
I have designed this parts for my NQD Tear Into Jet Boat.
The servo is an normal cheap one, you need the ServoBase and two ServoBrackets to print. You can use the screws from the boat, when you do it like me:
rip out everything (electric parts and the JetDrive), throw the electric parts away
clean the JetDrive from the plastic burr, glue the JetDrive in and use new ESC and Motor and Akku.
The watercooling is from the WaterInPut and WaterOutPut, some copper-pipe and some tupe and pneumatic-connectors --> just look at the pictures ;-)
I use the following parts from HobbyKing:
ESC:
https://hobbyking.com/de_de/hobbyking-50a-boat-esc-4a-ubec.html?affiliate_code=DHHDDBBTACIIBKS&_asc=8282848288
Motor:
https://hobbyking.com/de_de/2040sl-4800kv-brushless-inrunner-watercooled.html?affiliate_code=DHHDDBBTACIIBKS&_asc=2840745043
Akku:
https://hobbyking.com/de_de/zippy-flightmax-2200mah-2s1p-45c.html?affiliate_code=DHHDDBBTACIIBKS&_asc=2173757969
License:
Creative Commons - Attribution
JansWorkbench
