MysteryDough's character dashboard & storage for Gloomhaven

Please share your prints and feedback! Thanks!

This is a player character dashboard tray for Gloomhaven that also packs away for storage between sessions.

The existing dashboards were neat and inspiring but lacked features I was interested in, specifically: the ability to play entirely on the tray, including keeping track of hp and xp, and the ability to store the tray away with minimal tear down and set up and preserving as much state as possible.

You'll need to print:

• One Tray.
• One Lid.
• One HPXP and 4 Wheels. ( Skip if you use the official dials or your own method )
• Optionally, 4 feet. The feet get glued into the base. Their purpose is to prevent the tray from sliding when placed on top of the lid, both when in play and when storing multiple stacked trays in between sessions.
• Optionally, one each of the small and large card dividers. They are intended to separate the cards when they are stacked and stored.
• Blank dividers are provided in case needed. There is a large smooth surface on the bottom for labelling with a sharpie.

Notes:

• Designed for sleeved cards.

• Includes a clicking HP and XP dial that can be used in place or pulled out during play. Alternatively, dial printing can be skipped and compartment can be used for spin down dice or anything else. (If there's demand, I can see if it's possible to fit a tray for two spin down dice as an alternative.)

• Has separate compartments for attack modifier, discarded ability, lost ability, spent item, consumed item, active item, and active ability cards.

• attack modifier discard space and ability card space are deep enough to store all small and large cards that are in play, respectively.

• Has compartments for status tokens, loot, misc tokens in play, and one deep compartment for supply storage (e.g. unused character tokens).

• Token compartments have filleted fronts to make pulling tokens out easy.

• Active ability cards can be slotted in the rear slot and character tokens / markers can be rested up against it, if one prefers to use the tray rather than table space.

• When the tray is placed on the lid, there is a gap underneath that allows placing equipped items underneath, as prescribed by the manual.

• Character card fits on top and portrait is visible through lid to easily identify which character it holds.

• The cover secures all of the compartments, so status tokens, monies, etc, will not scramble. The HP and XP dials have detentes to avoid accidental shifting and the cover secures them in place.

• To store away, use the included card dividers and store all cards of same size in one of the two main card compartments.

• A generic double digit version of the dial counter is available here: https://www.thingiverse.com/thing:3167091

---

** UPDATE 2018-12-03**

• Increased width of Tray card compartments by 1mm, to 68mm (large) and 72mm (small).
• Updated Lid to match new total width.

** UPDATE 2018-11-10**

• Reduced width of HPXP posts, shrinking the overall width. Updated tray to match.
• Added a slot in the condition compartment to stand up condition counters.

UPDATE 2018-11-04

• Reworked the feet to make them easier to install and hold the tray better.
• Deepened chit compartment.

UPDATE 2018-10-21

• Slimmed HPXP profile

UPDATE 2018-10-19

-Tray
-- Replaced filleted compartment fronts with wavy base. Filleted fronts weren't ideal for pulling chits out because chits would snag on layers.

-HPXP
-- Arms now point straight up. Angled arms weren't pointing at obvious wheel face.
-- Wheel was sunken into base to give better lid clearance when in the tray.

UPDATE 2018-10-17

• Tray:
  -- Longer card compartments for less finicky insertion.
  -- Slightly wider card compartments to fit more cards.
  -- Much larger dial compartment for easier turning of dials when in the tray.

• HPXP:
  -- Arms are more sturdy and less likely to string.
  -- Lighter detentes for easier turning.

UPDATE 2018-10-12

• Consolidated dividers into 2 files.
• Increased solid space on divider cards to make more room for hand-writing custom dividers without the need to create new geometry.

UPDATE 2018-10-10

• Added card dividers to separate stacks when storing game away mid-session.

---