Mavic Air Lens Holder

UPDATE 16 November:
I uploaded the new version of Mavic Air Lens Holder. Now there is a version for SLA 3D printers (with exposed magnets) and in order to increase the force i decided to put 2 magnets together in each hole. So now in total the product needs 16 magnets that you can buy with the link below.

Hi guys!! This is my new project: Mavic Air Lens Holder

This gadget has 2 main parts: superior cover and inferior cover.
To keep them together I decide to put inside neodymium magnets (dimension: 5x1mm).
To make it possible we have to stop the printer when it finishes to print the highest part of the hole designed for magnets (height from the base: 5,7mm) and insert them inside.

• Export your gcode with Slic3r, Cura or other,
• Identify the right layer to stop the printer = 5,7mm x print resolution,
• Open to modify the Gcode using TextEdit or other text editor,
• Search the correct layer searching Z(right layer),
• Add the command line in the .doc file,
• Modify if you want the X and Y coordination,
• Enjoy !!

This is a guide to include fasteners/magnets into a 3d print model by modifying the Gcode.

EN https://solidutopia.com/3d-print-around-captive-parts/
IT https://www.youtube.com/watch?time_continue=400&v=LwLt3kRHhX0

Remember:

• don't make inside supports,
• modify gcode to stop the printer at high 5,7mm from the base,
• insert the magnets in the correct direction to attract the opposite one,

neodymium magnets:

https://www.amazon.it/MAGNET-Expert-Ltd-Confezione-neodimio/dp/B008UABHQ8/ref=sr_1_14?ie=UTF8&qid=1539684533&sr=8-14&keywords=magneti+al+neodimio

https://www.ebay.com/itm/100Pcs-5x1mm-Neodymium-Disc-Spuer-Strong-Rare-Earth-N35-Small-Fridge-Magnets/401029144006?hash=item5d5f331dc6:g:Z00AAOSw3mNbuFtQ:rk:3:pf:0