October 24, 2018
Description
A cylindrical Rick and Morty lithophane. It serves as lampshade. I bought the lamp on amazon.
I used a 0.2mm nozzle and printed at 0.1mm (24 hours print).However I recommand to print with a 0.4mm nozzle and 0.1-0.25 mm steps.
! The infill must be 100%, so you can't see weird patterns through your print !
The litophane and his base are not at the same scale (I scaled them manually in cura) So you should scale them before print especially if you don't have the exact same lamp.
!!! Don't use an incandescent light bulb. The lithophane will melt . Use a led light bulb.!!!
AMAZON link : https://www.amazon.fr/gp/product/B074QPGBV3/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
License:
Creative Commons - Attribution
ecureuilx
