Gloomhaven Character Dashboard Simple with Storage Top

Yet Another Gloomhaven Character Dashboard!

This one is quite minimal to suit my tastes. I prefer cards to be laying flat on the table ( I have plenty of real estate), easy to access shallow trays to hold small tokens and money chits and effects, a visible port for the artwork on the card, and sloped attack modifier card holders without encasing or surrounding them with 4 walls. Also, a slot on the right for tucking away lost cards.

Two versions are attached,

1. print both the _top and _bottom and then insert into pegs and glue. The alignment pegs are useless, lol, I’ve added a peg-less version, superglue that thing to the base. It's only purpose is to allow for the art work to be beneath the tray and creates a slot on the right hand side to 'tuck' the spent cards. Print the pegless base upside down, so you can superglue the smoothie bottoms together.

2. one piece, requires supports and it can be a pita for an item item like this.

Update (12/1/18)- Added a friction fit ultra light lid/cover. Walls are .96mm thick (2 shells), used 0 top/bottom layers, full honeycomb infill with 20-40% infill (your choice, the smaller value gives you larger honeycombs). The lid has 0 tolerance fit around the size of the dashboard, but since it is so thin and flexible, it shouldn't matter. Honeycomb makes material usage lower, faster print, and best of all see through!
(By the way, with slight remixing, the widths can be reduced by 20mm or so and probably made to fit into the original GH character tuck boxes...)

Update (12/2/18) Added pegless base and body(alignment pegs suck). Added deeper cover +2mm.
Feedback welcome. Enjoy!