Ramps or MKS Boards / tft 28/32" / Raspberry pi / Power supply : All-in-One! V2.1

update 08.12.2018

-add pic's ( thx Webby_83 )

update 5.12.2018

-place correct rear .stl ( thx JensL )

update 28.11.2018

-add 2cm for more place
-update all STL

update 21.11.2018

-modify rear plate for 6 connector GX16
-add pics

update 19.11.2018

-put the reader SD to the right side to accept the raspberry
-edit fan duct to accept the raspberry
-make Raspberry plate for independent mounting

update 18.11.2018

-add top plate for TFT 32"
-add raspberry Pi Plate for all motherbord
-edit the fan duct for power supply and left plate to accept raspberry pi
-add datasheet

update 13.11.2018

-Add support plate without screws for MKS GEN_L/MKS Base 1.6/MKS Sbase (Not tested)

update 12.11.2018

-update slope design ( thx to Exa-tech )
-add rear ventilation hole
-add SD card reader
-update pictures
-add text ( or not )

update 7.11.2018

-add fan duct for power supply
-adjust the ventillation output

update 3.11.2018

-rear plate with connector Gx16
-hole for fixing power supply
-update pictures and stl
-add foot

update 2.11.2018

-adjust the fixing of the middle plate
-adjust screen size
-creates a location for the nuts
-adjust fan screw size

update 31.10.2018

-corrected diameter for fixing without screws of the ramps 1.4
-Add pictures
-Add datasheet mks tft
-Hole for mks tft 28"

---

---

Box for Ramps 1.4 / tft 28 / 12V 30A power supply.

Easy and clean box for your 3D printer !

All printer !!!

(Not tested with MKS, feedback welcome)

---

1x Fan 90*90 12v 2 pin

1x MKS TFT 28" or MKS TFT 32"

1x Mother Board

1x Power supply 12V 30A

1x c14 plug

3x GX16 connector

1x sd extender

screw and nuts

---

---

in progress:

-Test with MKS board and Raspberry Pi (Thx to Bolenho)

-parts

-description

-On / Off Button

---

Comments and remix welcome

Please post your own print

Easy for print ! No support, no raft