November 3, 2018
Description
These belt tensioner's will solve all your belt tension problems.
Derived from other Thingiverse publications but modified to suit the A10 - may also work with other Geeetech models.
Print oriented as in the stl's. I used 0.1mm layers, 3 shells, 10% infill and no supports.
20/11/2018 It has been brought to my notice that the Y axis rail arrangement is different on some variants of the A10 and this mod may not work. This was specifically designed for the A10 with the Y rail mounted vertically. However the X axis tensioner may also work on the Y axis on other variants - not tested.
License:
Creative Commons - Attribution
NevG
