3D Community Personalities Holiday Ornaments

This will be a collection of the members from the 3D printing community on twitter. The goal is to create as many holiday ornaments around their logos as I can. Some logos will be uploaded with multicolor possibility, while most will be simple color swaps at certain layers.

If you would like to have your logo remade feel free to DM me @alkeshone on twitter and I will add you to my queue. I will try to update this in batches of 4 but it will just depend on how it rolls out.

All logos presented here are the works of those who own them, this is simply a fan service to the many awesome personalities out there. If you do not want your logo available, I will remove it, just contact me.

My process for many of these is to take a .jpg, import it into illustrator and work on recreating what I need. Next I export it as an svg into tinkercad for anything 3D related and I add it to my template.

When I printed these I always printed the middle ring in a different color. In order to make it fit you will need to snip off a little bit of the cone on the smaller logo ring and squeeze the sides to make it snap into place. If needed I can upload a video showing how I assemble these.

Update List:
Alien3D Ornament added. MC1 and MC2 are the files for multi color printers, Alien3D ornament is for your color swap.
11/4/18: I have added in Jet Prints, 3D Pink Mafia, and ProtoPasta. I have not tested them out yet but they should be good to go. As always let me know if you have any issues.
11/4/18: I have successfully printed Jet Prints, 3D Pink Mafia, and ProtoPasta with no issues. I have also uploaded Community Ketchup that is currently being test printed now. Enjoy.
11/4/18: APyroDesign and Repkord have been uploaded, still have to test print but I have added a design photo for suggested colors.

11/5/18: Added Inspyre3D's current logo although he tells me one day he will change it. Some feedback on the outer ring being too large, I will upload a new outer ring later, I have had a few where the spikes failed a bit and I used my 3D pen to add a little on.

11/6/18:Update - Added 4 new ornaments, added a new outer ring that should be a little smaller on the inside for a better fit. I have not test fit the outer ring yet but it should be good. Will be updating all current ornaments after a test print and fit. Will also be converting the previous ornaments to just single pieces to make it easier on you for printing.

11/12/18: Uploaded both versions of the middle ring, one solid and one open. Also included in this update are FunKing3D, WeberCustomCreation, and GreyBeard3D.

11/12/18: Uploaded Make it with Calvin and Jimmy Shaw's Tidbits. I have also removed all the previous models with the icon and outer ring and just put the icons and center piece in. You will need to choose your center, middle ring and outer ring for printing.

11/14/18: Uploaded JAYTEE, IVANM and their youtube show JATOG today. They recently showcased the ornaments and to show my appreciation I moved them to the front of the queue. Thanks again guys!