November 4, 2018
Description
K40 air assist with holders for line lasers to use in creating a cross hair for aiming.
The fit was a little loose, so I used a dab of hot glue to firm up the hold on the lens assembly. Also used a little hot glue to hold the air tube in.
You might want to use a drill bit to open up the nozzle a bit.
License:
Creative Commons - Attribution
kingbubbatruck![Air Assist for Diode Lasers [33x33mm] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0e/c7/3f/d9/83/IMG_0493_small.JPG&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0e/c7/3f/d9/83/IMG_0493_small.JPG&w=292&h=219&fit=contain&cbg=white&n=-1 "Air Assist for Diode Lasers [33x33mm] preview image")
![Air Assist for Diode Lasers [40x40mm] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/ca/1c/86/39/8c/Laser_40x40_Air-Assist_s2.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/ca/1c/86/39/8c/Laser_40x40_Air-Assist_s2.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "Air Assist for Diode Lasers [40x40mm] preview image")
