Hipercube complete Pitan Extruder for ArgentoV6 with BFPTouch, cooler and fan and Malevo.

Idea
I make remix and add some component to create this compact extrusor por pitan with BFTouch.

I redisign some part to make it more reliables.

For the BOM refers to the originals parts.

https://www.thingiverse.com/thing:2890554
https://www.thingiverse.com/thing:2895614
https://www.thingiverse.com/thing:3158589
https://www.thingiverse.com/thing:2890290

The "fins" were removed. The entire assembly is screwed and the sense of impression of the pieces is taken care of which results in a very strong extruder.

For the engine an Epson Em-400 was used ,or the EM-383 / 287 also work, any low torque motor.This motors have 4mm shaft, you need to file the shaft to flatten a part.Gears for 4 and 5 mm ar included.

The sensor of the BFPT is an M3 screw to which the trick was cut and smoked to 45 mm

Update nov/11/2018
For the motot the Imax was fixed at 0.4A so , mi drivers are A4988 with R100 as Rs (0.1ohms) --->Vref = Imax8Rs = 0.32V.. Everything OK,

La otra cosa que preguntaron el Desfasaje de Z me quedo a -1.9.pero eso depende de varias cosas pero mas o menos por ahi queda.

Los pasos/cm del conjunto motor/malevo quedo en 400 exacto