This was modeled after my Water Jet model.
REQUIRED TO COMPLETE:
- two 220X or 230X brushless outrunner motors
- two 3mm shafts (threaded or non-threaded, about 75mm or 3" long)
- four 8x4x3mm bearings
- two 2mm rods or four M2 screws (for steering system)
- two ESCs for the motors
- two 9g servos
- two steering boots and push rods for servos
- 2.4GHz transmitter and compatible PPM receiver
License:
Creative Commons - Attribution
JaniKabalin
