Summary

Renewed with cubes from .2 to 1.0mm nozzles.
each size is named based on your nozzle size, the wall thickness will be 2x the nozzle. As my research and experience show this to give accurate flow calibration for overall printing.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.12</p></div></p>                                                                    <strong>Filament:</strong> Tianse PLA                Red                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>See the Help Guide for Creality and others for the flow rate calculations that tell you what to do with the measurements from cubes, slice using profile and layer heights you generally use to print.</p><p><a rel="nofollow" href="https://www.th3dstudio.com/knowledgebase/3d-printer-help-guide-creality-others/">https://www.th3dstudio.com/knowledgebase/3d-printer-help-guide-creality-others/</a></p></div>

Post-Printing

Instructions

            <div><p>Use calipers to measure and record 2 values from all 4 sides.<br>Add them together and divide by eight.<br>Use this average for next step.<br>Divide .8 by the AVG that was previously established.<br>Divide the target dimension by the avg value, this is the value to multipy your current estep or extrusion multiplier by to have it corrected. </p></div>

All the flow test cubes, .2, .3, .4, .5, .6, .8, 1.0 by L3D

All the flow test cubes, .2, .3, .4, .5, .6, .8, 1.0 by L3D

Related Models