November 21, 2018
Description
My plan was to send a fuel line through a wall, and it needed to be water tight on the outside.
There is a slot for an O-Ring on the outside base. ID: 1 7/16 - OD: 1 11/16 - Thickness: 1/8
(Got the O-ring from the Harbor freight O-ring set)
The screw indents are designed for #8 Truss head screws with a 11mm head.
The outside Base Tip, is just a strain relief for the hose, it just pops in with a little glue.
The Outside Base should be flipped so the o-ring side is facing up, and enable supports. Not strictly needed though, it just makes the screw holes cleaner.
This ended up working perfectly, and is strong.
License:
Creative Commons - Attribution
CDeviant
