Bicycle Cargo Cage

Update (2021/02/28): Since there have been reports of breakage at the bottom, I've reinforced this. Also since almost everyone is likely printing this using FDM, I've added a models with most of the cutouts removed to make it easier to print (since the printer will hollow those sections out anyway).

Update (2020/08/29): I just realized (after all these years) the bottle cage standard is 2.5" spacing (63.5mm) not 64mm (although brands also are inconsistent)...I hadn't experienced any issues since I had also designed my own mounts/bosses for these. I've updated the model with the 63.5mm spacing, and ovalizing the holes for variances in manufacturers.

Cargo cage for bicycles supporting the Salsa 3 bolt type mounts. Will also work with normal bottle mounts if there is enough space and keeping in mind a lower load limit.

Best to print this vertically with PETG or ABS. More brittle materials such as PLA may fail under load. Or if your printer has nylon/nylon-CF capabilities that would be ideal. Supports are needed for most printers.

Works with Voile or Titan straps and a large bottle (Nalgene style) or small dry bag (~5L).