Summary

Update:1/3/19 Added a larger footshell wedge with a hole for a permanent magnet.

I aim to remove the wedge to gain access to the bolt for the leg to footdrive attachment.

Footshell/ Wedge attachment I made to insert into my timber footshells for Chopper

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Esun PLA                white

Post-Printing

Prime and Paint

            <div><p>I drilled 2 holes 40mm apart on the centreline of the footshell,  55mm down for the first hole from the top edge of the footshell. Parts can be screwed in from the inside for retention or just glued in.</p></div>

C1-10P Footshell Wedge

C1-10P Footshell Wedge

Related Models