SD Card adapter housing for the Creality CR10\CR10S\Mini V2

Please note this is not compatible with the new CR10 V2 version

This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S

1.This is primarily a cosmetic remix which includes larger and more fluent radii to soften the form further. I have not changed any of the internal details.

2.I have also included a break away foot\pad to the things which allows the thing to be printed vertically without a raft.

3.Similar to the earlier version to make the seating of the SD adapter snug to the housing I have included some interference points on the inside face (see image) these can be shaved if required to allow for any variation in different printer tolerances.

4.The things are the same but one has CR10S graphics and the others just CR10, CR10 Mini, Mini or Ender 3.I am not sure if the Ender 3 has the same control box but i have uploaded a version just in case but obviously untested.

The SD card adapter I used is at the following link:
https://www.amazon.co.uk/gp/product/B01C84YKVA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Update: 07\12\18 Uploaded an additional CR10S thing with a different font

Update: 10\04\19 Removed Ender 3 from Thing title

Update: 30\12\19 Uploaded version with CR10v2 graphics