World of Warcraft Lithophane Frame

Here's a project that took me around a week to complete all on 1 printer. the three bottom lithophanes are eSUN PLA+ Cool White with 6000k backlighting, Varok (Orc) has a yellow/greenish transparency behind him. Ragnaros on the top was printed with colorFabb PLA/PHA Standard White and is lit with 2000k Warm light (no transparency). .1 resolution on all prints.

Some of the basic settings I used are as follows:

.1 layer height
Accel values all set to 400
Jerk values set to 8
Print speed: 35mm/s
No infill, just multiple walls to fill the inside.

Everyone's printer will be slightly different so adjust accordingly. Each of these prints took anywhere from 20-30 hours to print.

If you’re interested in seeing more of my lithophanes or want to read up on print settings/STL generators please feel free to check out my
website: https://www.gameon3d.com/
and/or come checkout my
Facebook page: https://www.facebook.com/GameOn3D.
Thank you!