GPS Nixie Clock enclosure (from Elektor Nov 2014)

This is an enclosure for the GPS synced Nixie clock (using IN-14 tubes) as described in the Elektor magazine of November 2014 :

https://www.elektormagazine.com/magazine/elektor-201411/27158

It consists out of 2 parts the enclosure and a bottom plate. Everything screws together with M3 screws (I did not include any thread in the holes, but if you press hard enough the screws turn themselves in the hole and are fitting nicely).

The power connection at the back is done using a standard 2.1 mm dc plug (see pictures).