December 9, 2018
Description
This is a cuvette test tube holder for the Hanna Checker cuvettes. Everything presses together and I have had to use no glue for my racks. You might have to sand the legs if your printer likes to print a brim on the bottom surface. Print 4 of the Legs and 2 of the Top-Bottom Racks. Print the rack top and bottom flat. I used 100% infill on the legs and 15% infill on the racks. The cuvettes that came with my Hanna Checkers fit in the rack by friction. It is a tight fit but not too tight.
License:
Creative Commons - Attribution - Non-Commercial
3dprintedbeekeeper
