Custom Blade Disposal Box

A disposable blade disposal box. Print > Fill with blades > Throw away.

This is an extended re-design of zapta's Customizable X-Acto blade disposal bank.

• 1mm thin walls: sufficiently stable and secure, no unnecessary waste of material
• 1mm slot + inner slot guard to prevent blades from falling out (should never happen)
• Wedged-shaped opening for easy slot access
• Round and rectangular base shape option.

STLs

• blade_disposal_box_40x20x60_t1 s1.stl: A 40x20x60 box with 1mm wall thickness and a 1mm slot, ideal for double edged razor, scalpel, and utility knife (cutter) blades.
• blade_disposal_box_40x20x60_t1 s1 so3.stl: Same as above but with a slot offset of 3mm.
• blade_disposal_box_rect_40x25x60_t1 s1 so5.stl: A 40x25x60 rectangular box with 1mm wall thickness and 1mm slot (5mm offset).
• blade_disposal_box_40x30x60_t2 s2.stl: A slightly larger box with 2mm walls and slot.
• blade_disposal_box_60x40x40_t1 s2_so12.stl: A rectangular box (non-flat bottom) with 1mm walls and 2mm slot.
• blade_disposal_box_40x20x10 BRIDGING_TEST.stl: A small test model. If you are unsure about your printer's bridging capabilities, print this one first to see if the bottom of the box (top part, since printed up-side-down) is printed smoothly, without wasting much time and material

Customizer

If you have trouble using the Customizer always set resolution to "Draft" first, but remember to set it back to "Normal" before creating the final model.