December 12, 2018
Description
This is a Worker Swordfish ONLY adjustable lipo Stock ... The internal space is about 46x 51x 115mm . BUT i can make it longer on request since we need, This is designed for a 2200mah 4s lipo. However the Swordfish profile and the lid catches reduce that.
Swordfish Side battery box risers here
https://www.thingiverse.com/thing:3116836
Dominator Stock here
https://www.thingiverse.com/thing:3272587
Moving the battery back beyond the grip also helps to counter the weight of the motors and helps to balance the blaster out. AND certainly looks better than a hideous lipo hanging off the side.
You can connect power via the back of the stock attachment point OR into the back of the existing battery box (which i prefer)
Website
Http://Ultrasonic2.com
Facebook Group
https://www.facebook.com/groups/MakingStuffAwesome/
**** Why you should support me on Patreon ****
https://www.patreon.com/Ultrasonic2
Shop
https://www.etsy.com/listing/571034709/ultrastryfe-brushless-motor-cage-by
The stock is adjustable via m3 thumb screws (different than shown) on 10mmx8mm carbon fiber rods ( 8mm painted rods shown )
Painted rods are shown because it will take more than a month for the real carbon rods to ship to me and i just couldn't wait that long before sharing it with you .. i'll update the pics once i get them.
It's expected that you'll glue the rods into the Butt and end caps.
The stock has place for two additional "support" screws and i strongly suggest you pre drill these holes and use these screws to help to support the weight of the lipo hanging off the back
Print the battery box with the attachment point on the bed .. with supports over 89 degrees .. This means no supports are required for that back of the box .. which is then printed at a 80 degrees angle which i had not problems with but i do have ALOT of part cooling.
I printed the Butt with a 10 degrees angle so it sat flat on the print bed .. without supports other than over 89 degrees ... This also requires significant part cooling.
I printed the box lid upside down .. and came out just fine with good cooling.
The Licnence you agree to when downloading this thing prevents you from making a profit from MY thing. This means you CAN NOT sell this or any of my other things on places like Ebay, Facebook, Forums or Etsy. You also may Not sell My parts as Part of a complete blaster. I don't profit from putting this thing us as a Free download and therefore no one else should too.
Parts
M3 Nuts x3
M3 Thumb screws
8mm long x3 (at least one needs to be low profile. Not like the pictured ones)
Aliexpress
http://s.click.aliexpress.com/e/cqbAApHW
Amazon
https://amzn.to/2PuCTLC
M3 self tapping counter sunk screws
8mm x3
20mm x1
Aliexpress
http://s.click.aliexpress.com/e/9kpNSMu
Amazon
https://amzn.to/2QlXtmF
Attachment catch spring
dia 0.4mm D5mm L 15mm
http://s.click.aliexpress.com/e/belUCD2o
Carbon Fiber rods .. 10x8mm or solid 10 mm length 340mm or longer (i would suggest you get glossy carbon fiber because it looks awesome !)
Aliexpress
http://s.click.aliexpress.com/e/XsxqN7i
Amazon
https://amzn.to/2PsKeLW
Battery Turnigy Graphene Panther
Amazon
https://amzn.to/2NedXIY
AliExpress
http://s.click.aliexpress.com/e/ciythXoy
GearBest
https://www.gearbest.com/3s-65c-lipo-2200mah-_gear/?lkid=19775127
BangGood
https://www.banggood.com/custlink/m3vDdo4uJv
13/Dec/2018
Updated catch and door
19/Dec/2018
Updated door and stock catches
05/Jan/2019
Added alternate rod end
Improved aesthetics of the catch
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
1,875
967
Ultrasonic2
