December 13, 2018
Description
Alternative: https://www.thingiverse.com/thing:3385267
The Agronn's X-Top Pro flight panel has the Saitek throttles installed at almost 90 degree angle, so when the throttle levers are moved all the way forward, they touch the panel or the instruments that are installed in the panel. As a result it is difficult to use custom levers - they can't be advanced all the way forward. To fix this problem the throttles must be tilted backwards. This model should help to create the angle, sufficient to use the throttles with the custom levers. It should also suitable for the Cessna Trim wheel controller. The model has all necessary holes to securely attach the throttle and to attach itself to the standard holders in the Agronn's panel.
I include 2 models - one is as wide as the throttle itself and the other is narrower than the throttle's body. Both models have holes on their sides - they can be used to firmly connect the angle changers to each other side by side with the special pins. There are 2 pins included - the long one and the short one. The long one is used to connect narrow devices to each other and the short one is used to connect normal size devices to each other. There's also a model of the plug to cover the holes.
Reference to the X-Top panel:
Please see the note for the printing.
If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:
License:
Creative Commons - Attribution - Non-Commercial
Wierzbowsky
