December 18, 2018
Description
Inspired by the camera mount designed by Modmike (https://www.thingiverse.com/thing:2886101) which I printed but couldn't get to fit, I decided to draw my own version. Its a little bit chunkier (the bracket), and the camera enclosure should fit a Raspberry Pi camera V2.1 easily. Doesn't need any support or rafts etc.
Requires a couple of M3 x 15mm hex bolts
Camera bracket:
Print this upside down so that the flat part that sits against the QR code sticks up
Camera back:
Print this flat side down
Camera front:
Print this flat side down
License:
Creative Commons - Attribution - Non-Commercial
Codemonkey1973
