B5S4 Vent Gauge Stuff

Just some stuff to help modding a stock vent for a gauge.

Quick and dirty, but Fusion360 project files there if you need to tweak for a different sized gauge. As it is drawn, it is setup for the 49mm boost gauges like AWE and maybe ECS.

Vent Gauge is a model to cut if you want to throw it on a cnc.
It's just the cuts to run the CAM on. Setup for 1/8" endmill, but should be enough here to change it if you want.

Vent Gauge Plug Front is a spacer gizmo to stabilize the fins while cutting.
You need 2 of these.

Vent Gauge Plug Back is the same, but for the back of it.
Just need 1.

Print the Plugs in something flexible. I used TPU and they seem to work well.
Might even stabilize the fins well enough to throw it in the drill press and just knock it out with some hole saws.