Prusa LCD Super Cover - Haribo & Bear Editions

Remixed to change the text to match my Haribo Build. The LCD hole fits a 3.5" Adafruit PiTFT.

02/06/2019: Uploaded a fixed version of the Haribo Text. Realized the X button was too shallow so it may or may not have printed flush with the front of the cover. This should fix that.

12/29/18: Uploaded a "tweaked" version where i played a bit with the dimensions of the TFT cut out, TFT tab position and shaved a bit off the inside to make my PiTFT fit better. Not sure if mine was just a variation in production but the original bracket would not let the TFT sit flush. Also added a model for the text for those with MMU who wish to do two tone prints. Can also be done with a stock single extruder. In Slic3r, set it up as a two extruder print and put M600 in the tool change Gcode. You'll need to babysit the print for the color change. Once it lays a layer of your primary color over the text you can leave it "unattended" to finish. Roughly 6-8 color swaps based on the use of .20 layers. The text is .6mm deep. The X on the kill button is 1mm deep.

01/25/19: Per a request from a user, made and added a "i3 MK3 Bear Edition" cover.

All credit for the text and files used to assist to remix the original dual LCD cover goes to Cova who posted them originally in the 3030 Haribo Edition Github here https://github.com/PrusaMK2Users/3030_Haribo_Edition.