January 4, 2019
Description
If you plan to print with PLA, use the single piece, not the assembly
My setting:
100% honeycomb infill.
4 layer for external, internal, top and bottom.
0.12 layer height
Support
Raft
Generic low cost PLA at 195°
Your printer MUST perfect calibrate in all axis (x,y and z) otherwise parts not fit well.
#edit 1
reduced my logo depth to not impact in print.
#edit 2
Gear is 28 teeth, diameter 23.8 mm, height 5 mm
Shaft diameter 6 mm, height 30.9 mm
#edit 3
Fixed a big mistake in shaft...
License:
Creative Commons - Attribution - Non-Commercial