FRC Dual 775 Clamping "Gearbox"

Made by FRC 5254 HYPE.

A 775 style motor "gearbox" that clamps onto either 1x1 or 2x1 tubing and allows a reduction using a GT2 Belt. A variety of pulley/belt sizes can be used due to the sliding tension bearing in the middle.

There are two versions of the sliding bearing mount depending on the tolerances of your printer.

2" Tubing: follows the spacing of a VEXpro single reduction clamping gearbox.
1" Tubing: follows the spacing of a side bearing gusset

Hardware required:
4x 1.25" 8-32 Bolts | 91251A201
4x 8-32 Locknuts | 91831A009
3x 8-32 Heat-set inserts | 93365A140
2x 1/4" ID Bearings | Ex. 6383K213
1x ~1.25 1/4-20 Bolt
1x 1/4-20 Locknut
2x 775 motor | Ex. 775 Pro & Readline
2x 12T GT2 Pulley | VEX
1x ??T GT2 Pulley | VEX or 3D print
2x Hex/Thunderhex bearing