January 6, 2019
Description
A remix of the Dessicase feeder component for PC4-M5, PC4-M6 and PC4-M10 push-fit connectors. I had spare PC4-M5 connectors I wanted to use so I remade the part with a compatible size hole. While I was at it I resized it for M6 and M10 as well.
Printed upright, the hole should be tight enough to that the connector will thread into the plastic, but it shouldn't be too tight to start. If you have trouble starting the thread clean the hole with a drill bit. Too much force and you may crack the print along the layers.
I don't have any PC4-M6, but I sized it using a screw with the same thread. It should work, but I can't verify.
License:
Creative Commons - Attribution
wsreith
