January 28, 2019
Description
Pi TFT plus Console Case for 3.5 Inch Displays
Some additions for using displays without mounting holes: The support frame to place between Display und PI to give the display a better foundation then the connector plug alone could give (fits tightly when done on the same printer). The Top cover is a little thicker (1.5 mm) and more closed to hide the edges of the Display. Especially made for the Geekcreit Display (but fitting all types with a the bigger dead area on the right side of the Display (where you have 8mm between the edge of the Display and the begin of the pixel area)).
There are fast attachment holes in the base, fitting 4mm hex screws (second picture).
Everything else unchanged - can be fetched here: https://www.thingiverse.com/thing:2471701
Special thanks to arcmatt for providing stp sources!
License:
Creative Commons - Attribution
eremit
