Mini Japanese Lamp

I saw someone build this on YouTube out of wood and I thought it will also work with 3d printing. https://www.youtube.com/watch?v=vj2umAt6Dsk

I printed 1 of Frame 1 and 1 of Frame 2 with a 30% fill.

You will need 4 of the large panels (1 or 2, 2 different designs) & 1 of the small panels.

The small panel was printed with a 30% infill, 3 layers.

I Printed the led panel with a 100% fill. The design uses the following design, https://www.thingiverse.com/thing:525799 and uses a CR2032 battery.

The led I used is a straw hat led, 160 degree 2.1 volt led using a 47 Ohm resistor.

You can use super glue to put it all together.