Drone props carying case (parametric)

After several requests for different props sizes in the original design (https://www.thingiverse.com/thing:1104993), I re-created it in Fusion360.
It is now fully parametric.
The STL files are for a 5” prop (X4).

To change the dimensions, just open the Fusion360 file and modify the parameters ->Modify/Change Parameters.

• prop_radius : the length of one blade in mm (add 1 mm for clearance)
• Blade_width : the width of the blades in mm (add 1 mm for clearance)
• prop_height : the height of the prop in mm (add 0.25 mm for clearance)
• Number_of_props : 4 in the case, but any number that you like

Other parameters can be controlled as well.

If you are not familiar with Fusion360 send me a comment with the four parameters (above) of your props and I will generate the STL for you.
Enjoy!