Ford Flat Head V8 Working Model Engine Parts

I really hate supports... so I am slicing some of the models to make them easier to print with little or no supports. The image in yello id how I positioned them on my bed and if they needed supports. The blue are the STL files

I needed to cut the bell housing off to fit my 200x200x200 bed. A few other had asked for this as well.

I also wanted to be able to print the oil pan with minimal supports. Slicing it in 3 pieces allowed it to be printed vertically with no supports on the main and flange parts of the pan and minimal supports on the front part. This will make for a cleaner part when finished and does not effect the dimensions of the final part. Only the oil pan front part will require any supports as seen in the pictures.

The upper intake now lays flat for a better print without supports.

Crank Pulley will now print clean with no supports.

The Starter flange now lays flat so it will match the layering of the pan. The larger part does require supports.

NOTE that the parts have to be rotated 90 degrees as seen in the pictures to print them flat on the bed.

All other parts are available at the attributed link.

Thanks again to Eric for another excellent model.