January 12, 2019
Description
Rapid high volume part cooling direct to the tip. Works well. sits just under the lip of the hot block, and still above the bed.
I didnt use supports but use your own as required if your machine cannot do long bridges.
I fitted a 40X20 as the 40X10SLIM units didn't deliver enough cooling IMO.
Currently the model ONLY works for the Tronxy sensor, the holes sit a lot higher than they have to for the rubbish green thing Tevo ships with this unit.
FAN: https://www.amazon.com.au/Generic-40x20mm-Cooling-EFB0412VHD-Connector/dp/B07CSNLX3D/
The bolts are from the left over ones from the Tevo build.
License:
Creative Commons - Attribution
15,656
nauseum
