Mini-z Mounting Kit for Lexan Bodies

These parts are for mounting a lexan body to a Mini-z. The front bumper attaches to the front most lower mounting points on the bottom of the Mini-z chassis(not the mounting point of the front body clip). The posts attach to the top of the bumper. The smaller plates are to be mounted to the two most forward posts on esc cover of the Mini-z chassis and then the mounting posts cut to length and attached to that.

The print orientation is as downloaded for all parts. You can print the bumper and mounting plate at .2mm and the posts at .1mm or smaller.

I use this to clean up the holes in the print as well as put holes in the body-
https://www.amazon.com/Hobbypark-0-14mm-Puncher-Reamer-Drills/dp/B01EIH573K/ref=sr_1_2_sspa?ie=UTF8&qid=1547490558&sr=8-2-spons&keywords=lexan+body+reamer&psc=1

I don't have these but at 1mm diameter these body clips will work-
https://www.amazon.com/dp/B01LX4BPJG?aaxitk=0D.KsGyAmgr.BfyGMYtjSg&pd_rd_i=B01LX4BPJG&pf_rd_p=3ff6092e-8451-438b-8278-7e94064b4d42&hsa_cr_id=8486899820301&sb-ci-n=productDescription&sb-ci-v=Apex%20RC%20Products%201%2F16%20Small%20RC%20Car%2FTruck%2FBuggy%20Galvanized%20Steel%20Body%20Clips%20-%20100%20PACK%204025

I used these M2 countersunk screws for the top plate-
https://www.amazon.com/gp/product/B00NQ8G3ZO/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

I used these M2 cap screws to mount the posts to the front bumper-
https://www.amazon.com/gp/product/B074GZ46MV/ref=oh_aui_search_asin_title?ie=UTF8&psc=1