January 16, 2019
Description
I lost the tip of my Smok Stick V8 (Baby Beast) eSig .... well this is why I wanted a 3D printer for times like this, so I made a replacement I think this is pretty close to the original. I used PLA for the main part, I finished it by sanding with 400 grit sand paper and used 2 O rings 9X12X1.5 mm they cost me &1.35 for a 3 pack at ACE Hardware, this one fits very tight and so far is holding up great. I printed at 100% infill at .1000 with S3D
License:
Creative Commons - Attribution
rmorrow50
