January 20, 2019
Description
The model has been cut into several section to be able to print it without support.
It has been increased in size to a length of 220mm.
Part 1, 7 and 8 can be printed with no infill.
To make the lineup for the gluing easier FilaPins are added to each cut.
For that you will need 13 peaces of 1.75mm filament which are 9mm long.
Therefore i do not suggest to scale the model.
Also a 3mm hole as been added to part 2 to present the ship on the base.
As a support an peace of 3mm clear filament can be used.
Star Trek Ship Base design: https://www.thingiverse.com/thing:3361765
If you don't want the hole for the stand you can use the part 2 without hole.
Credits go to Solid_Alexei for the grate model of the Enterprise D:
https://www.thingiverse.com/thing:1423364
License:
Creative Commons - Attribution - Non-Commercial
Bengineer
