January 21, 2019
Description
First of all if you ever need help or want to help the calibration of 3d printers feel free to join the FB group https://www.facebook.com/groups/1156304777857840/
Had a few people have trouble printing the joint as one piece so here is a wire housing that you can just drop the pins in and gravity will do the rest. Same locking mech as the originally. A screw.
So here is my recommendation. I have detached the joints and labeled them so instead of spending all that time printing the whole part to discover it doesn't fit, you can determine very quickly. So print the 3 test joints first. Put them together and see which works for you. Then print the big part. The Base for the Wire housing does not have a different size so you can print that with confidence.
The male parts are labeled with the offset from the female part. Not the size of the pin. So the bigger number mean a bigger gap.
Tested and works nicely!
My TAG is C4 on discord under M3D-Community.
License:
Creative Commons - Attribution
chasgiv4
